Home | Home | Accessories

Weighty spa Covers are great reason to Waste Energy

By: Ashfaq


Read More About Accessories

several people think heavy cover as a strong and good to retain heat. But heavy and wrecked Spa Covers waste energy. There are various websites of spa covers companies which are selling rigid foam spa covers that life will end up heavy or broken, usually within two years. To me this is like a coat salesman telling you wet wind breakers won't keep you warm, here you want to acquire this new dry wind breaker and go play outside in the rain.

The seller hopes that you won't note that he's selling you the same thing you're changing now. If you're changing your spa cover because it got heavy, before you acquire the next one, possibly it would be good to think about why the old one got heavy?

The cause of the foam spa cover to obtain heavy is that it traps damp inside. So foam board is used in many wadding. Largely it can be used about refrigeration storage areas like in a super market. Layers of rigid foam board are what keep the refrigerated section cold while the buyer area is still warm. When used in this application the foam is not subject to warm moist steam. As long as the foam stays dry it has a expected insulation value. But if the foam were to have wetness in it instead of the little air spaces it uses to insulate, it would have no insulation value at all.

You couldn't acquire water into it faster even if you tied it to the bottom of your swimming pool. If you were trying to invent a system to get foam to flood as fastly as possible, the design would involve lots of steam under it and a cooler temperature on top of it. Because water molecules are bigger than steam molecules. Steam can obtain into slighter spaces sooner than water. And once the steam cools, it condenses back into water, shifting air in the foam as it does.

One day will appear when your spa cover will becoming heavy, damp has begun to replace the air spaces in your cover. When it does, the little insulation value that cover might have had goes down dramatically From whatever it may have been when you first put it on your spa it has gone down to as much insulation as a wet piece of plywood by the time you in fact see it got heavy.

You might acquire fooled into thinking that it is still insulating fine because snow won't dissolve off it. Unluckily, you would be wrong. Snow won't melt off a frozen pond either but it doesn't mean the ice is insulating the water. When snow falls on a flooded foam spa cover, it freezes the moisture in the cover because it is lying directly on the cover. The water of your spa is never in contact with the foam since the foam is resting way up on top of the acrylic of the spa, usually about a foot above the water surface.

Article Source: http://depositarticles.com/

For more on hot tub covers and spa covers Visit thecoverguy.com for more detail.

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Accessories Articles Via RSS!

counter easy hit

Powered by Article Dashboard