Home | Cars And Trucks

Remote keyless system

By: Liangshuang


Read More About Cars and Trucks

The system signals that it has either locked or unlocked the car usually through some fairly discreet combination of flashing vehicle lamps, a distinctive sound other than the horn, or some usage of the horn itself.
The functions of a remote keyless entry system are contained on a key fob or built into the ignition key handle itself. Buttons are dedicated to locking or unlocking the doors and opening the trunk (or, on sport utility vehicles and station wagons, unlock/open the rear tailgate). Some cars will also close any open windows and roof when remotely locking the car. Some remote keyless fobs also feature a red panic button which activates the car alarm as a standard feature.
Some cars' engines with remote keyless ignition systems can be started by the push of a button on the key fob.

For offices, or residences, the system can also be coupled with the security system, garage door opener or remotely activated lighting devices.

Range testing

A typical range plot.

The operating range of keyless remotes varies widely between manufacturers. E.g., Ford use 20 m for Europe and North America and 5m for Japan and other markets where the transmitted power restrictions are much greater. The range is either measured from the skin of the car or from a nominal central point.[citation needed] The range around the vehicle is not linear as corner pillars and small window apertures attenuate the signal, hence reducing its range , sash locks .
Programmin , mail box lock .

Remote keyless entry fobs emit a radio frequency with a designated, distinct digital identity code. Inasmuch as "programming" fobs is a proprietary technical process, it is typically performed by the automobile dealership. (In point of fact it is a computer in the car which is programmed in the process, not the fob itself.) In general, the procedure is to put the car computer in 'programming mode'. This usually entails engaging the power in the car several times while holding a button or lever. It may also include opening doors, or removing fuses. The procedure varies amongst various makes, models, and years. Once in 'programming mode' one or more of the fob buttons is depressed to send the digital identity code to the car's onboard computer. The computer saves the code and the car is then taken out of 'programming mode' , mitsubishi keys .

As RKS fobs have become more prevalent in the automobile industry a secondary market of unprogrammed devices on sites like Keylessride have sprung up. Some web sites sell steps to program fobs for individual models of cars as well as accessory kits to remotely activate other car devices , fingerprint access control .

Trunk release

On cars where the trunk release is electronically operated, it can be triggered to open by a button on the remote. Conventionally, the trunk springs open with the help of hydraulic struts or torsion springs, and thereafter must be lowered manually. Premium models (like SUVs with tailgates which are possibly out-of-reach for some) may have a motorized assist that can both open and close the tailgate for easy access and remote operation.

This section requires expansion.

Advanced Key

Some cars have a proximity system that is triggered if a keylike transducer (Advanced Key) is within a certain distance of the car. It is sometimes called hands-free. It is commonly found on European and Japanese luxury vehicles, such as Mercedes-Benz, Audi, Subaru, Honda, Toyota, Volvo, Lexus, and Nissan. The vehicle can be unlocked without the driver needing to physically push a button on the key fob to lock or unlock the car and is also able to start or stop the ignition without physically having to insert the key and turning the ignition. Instead, as you approach the vehicle, the vehicle senses that the key (located in your pocket, purse,...) is approaching the vehicle. When you are in the car's required distance there are two methods typically used by auto manufacturers to unlock the doors. In method one, once you are in the car's "bubble" (the required distance you have to be from the vehicle for the key to be recognized) the car will automatically unlock the driver's door. In method two, once you are in the car's "bubble" the car doesn't unlock the door unless you touch one of the sensors located behind the door handles. As others attempt to get in, it senses that the driver is within the "bubble" and as they touch the sensors behind their door handles, the car will unlock their door. In certain vehicles, there are also various functions built into the transmitter to perform various tasks. For example, in many import vehicles, if you press the unlock button twice and hold the button on the second push, the vehicle will roll down the front two, all four, and/or sunroof windows to ventilate the interior. If you follow the same procedure with the Lock button or insert your key and twist the lock twice, holding on the second turn, the car will roll the windows and/or sunroof up. In the 4Runner there is a button to roll down the rear window. Some can activate the cars headlights/reverse/tail lights remotely. Some can activate various electronics you install via your dealer (Aftermarket Neon Kits, AUX Lights,...).

See also

Near Field Communication possible uses and applications
External links

Article about how keyless entry remote systems on automobiles work
Requirements of Remote Keyless Entry (RKE) Systems
False warning about RKE code thiefs at Snopes.com
A Blog dedicated to keyless entry remotes

Article Source: http://depositarticles.com/

Locksmith Pick Gun

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Cars and Trucks Articles Via RSS!

counter easy hit

Powered by Article Dashboard