Home | Computers

Linux Dsl Setup

By: Nils Hyatt

Read More About Computers

If you're having hassle attempting to put in at&t yahoo dsl on your linux os, then hopefully this information will show you tips on how to arrange at&t yahoo dsl on your linux pc. In my guide on tips on how to setup att dsl, I will probably be using Mandriva linux.This tutorial also needs to apply to pretty much all the other linux distributions on the market. Also in my tutorial on putting in at&t yahoo dsl on a linux os, I will be using a 2wire 2700hg-b wi-fi router, but this guide must also work for other 2wire routers that at&t ships out.

The very first thing that you have to do to put in at&t dsl on your linux machine is setup up your ethernet adapter to connect utilizing dhcp. In the mandriva linux distro, you'd go to:

1. Menu
2. Tools
3. System Tools
4. Configure your Computer

Then as soon as the window beneath seems, you would then click on on the Community and Internet tab on the left facet, then click on setup a brand new community interface. When you open the "setup a brand new network interface" tab, click ethernet and click next. Then select your nic card from the checklist and click next. Choose automated Ip BOOTP/DHCP

Now you would put a check mark subsequent to Get DNS servers from Dhcp and a test mark subsequent to Assign host identify from Dhcp address. After you may have accomplished the above, it is best to now have a working ethernet adapter on your linux distro. The subsequent thing that you are going to wish to do is start to register your at&t yahoo dsl account on your linux pc. To begin registering your account, all you have to do is open a web browser. I like to recommend using Konqueror, in case you are utilizing KDE as your desktop; I had issues with mozilla firefox. After you open your browser, you must have a home windows that resembles the one below.

The next factor that your are going to install at&t yahoo dsl in your linux os is type in https://sbcreg.sbcglobal.net/ into your web browser. This could open an internet page that shows the current at&t members agreement. All you need to do now is click on on the "I Agree" button, to continue the registration strategy of your At&t dsl account

After you comply with the terms, it is best to now have the ability to enter your phone number and begin organising your new e-mail and membership account and password. Notice - Make sure you keep in mind this info, you are going to want this information later on. After you've setup your new at&t account, what you are going to want to do is ready a password in your router. To set a new password in your 2wire router, open an internet browser and sort in 192.168.1.254 which should open the default gateway. If successful it is best to now have a window that appears just like the one below. Now all you have to do now is create a password for your router and click the subsequent button.

After you will have set the password in your router, the default gateway web page for your 2wire router should now appear. When you see the default gateway web page, click on on "Run System Setup Wizard". The following factor that you have to do is enter a activation key code into your 2wire router. For a list of activation codes in your 2wire router. After you activate your 2wire router, you're going then have to set a time zone on your router. After you set your time zone, the arrange connection data windows should open. When you see the below window, you will then input the username and password you created earlier.

Simply fill out your private data into the types and click the register button. As long as the server is up and running, you must have now accomplished in registering your 2wire router. After you see a window that looks like the one under, all you have to do now could be reboot your web browser. After you close and then reopen your internet browser, it is best to now be able to surf the internet. In case you have troubles, strive reboot your linux pc. If you are still having bother, listed below are few hints: Web browser displays web page not found - There's a drawback with the best way you arrange your ethernet connection. Attempt re organising your dhcp settings in your ethernet adapter, so in the event you routinely set you ip, dns and hostname.

Article Source: http://depositarticles.com/

Linux Dsl Setup Server Servers

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Computers Articles Via RSS!
Additional Articles From - Home | Computers
Sign Up for a free account.
Our other websites
All about SEO
Beauty Tips Forum
Submit Articles
Member Login
Link Us
Submission Guidelines
Ezine Notifications
Article RSS Feeds
Sitemap
New Stuff
About Us
Developer
Good shopping portal
Link to Us
Contact Us
Privacy Policy
Terms of Service

counter easy hit

Powered by Article Dashboard