Home | Business | Mystery Shopping

How to Choose the Right Clevis Hooks

By: Rokai Kolam


Read More About Mystery Shopping

Are you planning to purchase clevis hooks or other types of hooks but you’re not quite sure how to begin? Here are some information that could help you.

Clevis hooks and S hooks are used as attachment to different cargo control equipment such as binder chains, ratchet straps and winchet straps, and they are very important in securing equipment to the flat-bed vehicle used for transporting.

Clevis Hooks

Clevis hooks come in different sizes. Ideal sizes available are at ¼ inches, ½ inches, 3/8 inches and 5/16 inches, though different brands may have different availabilities on these sizes or may carry other hook dimensions.

When you’re purchasing a clevis hook, one thing to look out for would be the grade it has. Know that different grades allow for different uses; for example, a Grade 70 clevis hook is used mainly for transport and towing, while Grade 80 clevis hooks could be used for overhead hanging. Check with the hook’s manufacturer to ensure that you will purchase the correct grade for your purposes. Also, your clevis hook grade should be compatible with the strap or chain that you will have it attached to, to ensure maximum efficiency and so you could better determine the total working load limit on the whole cargo control system.

With regards to the working load limit, you should know that it is different from the ultimate load limit. The working load limit is the weight that you can safely subject the hook to on a regular basis, while the ultimate load limit sets the weight where there is a very high risk of damage on the hook. For Grades 70 and 80 hooks, the ultimate load is 4 times the value of the working load limit.

A high quality Grade 70 clevis hook typically has a working load limit range of 5,400 pounds to a high 12,750 lbs, depending mostly on its size and dimensions. Along with the grade, the hook should also correspond to the size of the cargo transport chain it will be attached to.

A clevis hook could be categorized as a grab hook or a slip hook. There are many differences between the two, such as in weight (a grab hook is generally lighter than a slip hook) and its size (a grab hook is smaller and more compact, though it is bulkier on the hook part). Slip hooks also typically have a latch touching the hook part while grab hooks do not. They have the same function, however, and they both usually have a “coller pin”, or a pin to lock it into position.

Clevis hooks are very affordable; prices could range from $2.45 to $5.99. However you could purchase these hooks at discounted rates ranging from 10 to 20% off the current market price.

S-hooks

S-hooks are generally more lightweight than clevis hooks and can typically be found on ratchet straps. As with the clevis hook, their working load limit should be at par with the strap it is attached to; typical ranges are at 440 lbs to 1,000 lbs. S-hooks are themselves lighter than clevis hooks, making them very easy and convenient to use. Preferably, s-hooks should be vinyl-coated, to avoid the incidence of rust and tarnishing.

There are in fact many other kinds of hooks available, such as the J hook and the flat hook. You would be able to purchase your choice of strap that already has its best type of hook attached to it; this way, you wouldn’t have to spend too much time deciding on the hook you’d need for your purposes.

Article Source: http://depositarticles.com/

So if you’re planning on purchasing a separate clevis hook, or an entire cargo control system then go ahead and choose from among the high quality products at www.mfrexpress.com, where you certainly can’t go wrong.

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Mystery Shopping Articles Via RSS!

counter easy hit

Powered by Article Dashboard