Home | Computers

Computer beeps transfer a message to you

By: Lisa Reese


Read More About Computers

One beep from your computer at startup can style your sum total day. Just ask anyone that has turned on the PC and suffered the agony of some beeps and in that case nil. When you obtain a computer, it will make your mark by way of the BIOS (Basic Input/Output System), pre-installed on an EPROM (Erasable Programmable read Only Memory), chip on the main/motherboard. When you initiate your computer the CPU (Central Processing Unit), sends inspection of the PC to the EPROM BIOS. The BIOS is measurement of the POST (Power-On Self Test) of the computer. Once the BIOS receive the go ahead since the processor it starts its magical journey over all the components and peripheral devices attached to the computer. CMOS (complementary metal-oxide semiconductor), control the data that is accessed by the BIOS arrangement. Basically, the CMOS is the explanation that you know how to unplug your computer and keep the startup and BIOS information. CMOS is maintained on the motherboard in an always-on state supported by a battery installed on the focal board.

To a large extent like the human mind, as we wake up in the morning our mind remembers that we have eyes, ears, a nose and so on. We know the town we live in. You be capable of go to job, stop by the post office, the grocery store and back home with no having to use time perusing a map for directions to each one. Your computer works to a great extent the same way. Not including a memory device to instruct the computer on what is where, the operating system and other software would factually have to take the time to locate each part of the PC and its components every time they are loaded. Providentially, the BIOS take care of that for the processor, operating system and components.

How the BIOS work?

Each computer comes pre-loaded with the BIOS on the motherboard. Motherboard manufacturers work long hours with BIOS manufacturers to make sure the information in the BIOS is certain to the requirements and components of the motherboard. Although there are a number of BIOS manufacturers, the two most popular are AMI (American Megatrends Incorp.) and VIA. BIOS simply put, is a program and not a real device. It is the software that informs the computer at startup of all the devices (input and output) attached to the PC.

The BIOS also lets you appreciate when there is a difficult. It accomplishes this by checking for known devices and makes sure they are still attached. When the BIOS find out a problem it sends a series of beeps to the motherboard speaker. This series informs the user of what the problem is, at least as well as the BIOS can uncover. The BIOS sends a series of beeps to the onboard PC speaker to put in the picture you of the problem. Pretty trouble-free. The problem is that no manufacturer of BIOS uses the same beep series. This is why it is important for you to live through the BIOS software manufacturer for your detail PC. We will make clear how to regain this out shortly.

How do I be aware of if the BIOS are working?

That is simple, if your computer starts and you get a single short beep, the BIOS is working and has found and relayed the information a propos the input/output devices to the CPU. If you turn on your computer and nothing happens at all, the unruly is possibly in your power supply (this assumes that you have it plugged in properly). The BIOS is most likely still working but the computer can't start because of a power problem. If all is well, the BIOS will find all the attached input/output devices, fire a single short beep to the interior speaker and the computer will set up the boot method.

There are three ways to change and/or modernize the BIOS. Unlike ROM (read-only memory) the EPROM BIOS can be changed or updated. The time for altering the EPROM software is referred to as flashing. You may possibly have over heard someone say that they need to flash the BIOS with a new update. Don't worry if you have not at all heard this, well, maybe you should uneasiness a little. Computer components transform on a day after day basis and the BIOS needs to be open enough to be able to change with them. All computers make available the user to change the BIOS software and how the computer reacts to input/output devices. The standard is to offer the user a way in to the software using a hotkey at startup. Unexceptionally this hotkey is the F2 key, the Del (Delete) key and in some cases the F1 key or a mixture of keys. Launch your computer and lookout the bottom left corner on the screen. This should consent to you know which key to press to enter the BIOS setup. The BIOS setup, sometimes called the CMOS setup, allows the user to make changes on the fly and save them.

Changing the incorrect settings can render your computer useless. There, we warned you twice, that is because we want you to assume twice before you change the BIOS. Second is the Flash BIOS update from the manufacturer of the BIOS. This is a software program that the manufacturer of the BIOS sends out periodically to underwrite the BIOS conform to new tools and standards. You can normally prevail on this software upgrade from the manufacturer and sometimes from the motherboard manufacturer. Be careful, be very careful installing the software and be confident that it is for your individual BIOS. Always see the manufacturer’s commands exactly. The third way is replacing the BIOS chip. Replacing the chip possibly will be your only recourse and should be left to authority computer repairmen.

Article Source: http://depositarticles.com/

Browse through 100s of computer related tips Right Here at eztips.biz/computer Search Right Here whatever you need.

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Computers Articles Via RSS!

counter easy hit

Powered by Article Dashboard