Home | Computers

Computer beeps supply a message to you

By: Lisa Reese


Read More About Computers

One beep from your computer at startup can style your total day. Just ask anyone that has turned on the PC and suffered the agony of some beeps and so therefore zero. When you obtain a computer, it will make your mark among the BIOS (Basic Input/Output System), pre-installed on an EPROM (Erasable Programmable read Only Memory), chip on the main/motherboard. When you initiate your computer the CPU (Central Processing Unit), sends inspection of the PC to the EPROM BIOS. The BIOS is quantity of the POST (Power-On Self Test) of the computer. Once the BIOS receive the go ahead since the processor it starts its magical journey in the course of all the components and peripheral procedure attached to the computer. CMOS (complementary metal-oxide semiconductor), restrain the data that is accessed by the BIOS association. Basically, the CMOS is the explanation that you know how to unplug your computer and hold the startup and BIOS information. CMOS is maintained on the motherboard in an always-on state supported by a battery installed on the central board.

How the BIOS work?

All computers come pre-loaded with the BIOS on the motherboard. Motherboard manufacturers work long hours with BIOS manufacturers to make sure the information in the BIOS is certain to the needs and components of the motherboard. While there are a number of BIOS manufacturers, the two most trendy are AMI (American Megatrends Incorp.) and VIA. BIOS simply put, is a program and not a tangible device. The BIOS also lets you appreciate when there is an obstruction. It accomplishes this by checking for known devices and makes sure they are still attached. When the BIOS spot a problem it sends a series of beeps to the motherboard speaker. This series informs the user of what the problem is, at least as well as the BIOS can clarify. Let's say your video card has gone the way of the XT model computer, the BIOS senses that it has died or is not installed. The BIOS sends a series of beeps to the onboard PC speaker to inform you of the problem. Pretty austere. The problem is that no manufacturer of BIOS uses the even beep series. This is why it is important for you to live through the BIOS software manufacturer for your specific PC. We will make clear how to regain this out soon after.

How do I know if the BIOS are working?

That is simple, if your computer starts and you get a single short beep, the BIOS is working and has found and relayed the information with reference to the input/output devices to the CPU. If you turn on your computer and nothing happens at all, the unruly is possibly in your power supply (this assumes that you have it plugged in properly). The BIOS is in all probability still working but the computer can’t start because of a power problem. If all is well, the BIOS will find all the attached input/output devices, fire a single short beep to the interior speaker and the computer will set up the boot procedure.

There are three ways to change and/or fill in the BIOS. Unlike ROM (read-only memory) the EPROM BIOS can be changed or updated. The dub for altering the EPROM software is referred to as flashing. You may perhaps have over heard someone say to they need to flash the BIOS with a new update. Don't worry if you have not at all heard this, well, maybe you should be concerned a little. Computer components transform on a day after day basis and the BIOS needs to be supple enough to be able to change with them. All computers allocate the user to change the BIOS software and how the computer reacts to input/output devices. The standard is to offer the user a way in to the software using a hotkey at startup. Naturally this hotkey is the F2 key, the Del (Delete) key and in some cases the F1 key or a blend of keys. Launch your computer and watch over the bottom left corner on the screen. This should let you go through which key to press to enter the BIOS setup. The BIOS setup, sometimes called the CMOS setup, allows the user to produce changes on the fly and save them.

Changing the erroneous settings can render your computer useless. There, we warned you twice, that is because we want you to consider twice before you change the BIOS. Second is the Flash BIOS update from the manufacturer of the BIOS. This is a software program that the manufacturer of the BIOS sends out periodically to insure the BIOS conform to new tools and standards. You can normally find this software upgrade from the manufacturer and sometimes from the motherboard manufacturer. Be careful, be very careful installing the software and be confident that it is for your explicit BIOS. Always chase the manufacturer's orders exactly. The third way is replacing the BIOS chip. Replacing the chip could be your only recourse and should be left to trained computer repairmen.

How do I be aware of which BIOS I have?

That also easy, the computer will in fact tell you. If you are fast enough, you will look into the BIOS name and version on the screen the flash you turn it on. If you are not a speed-reader you can open the BIOS setup and retrieve the information from the setup program. You may also e-mail the motherboard manufacturer and discovery which BIOS was installed on that board.

As stated earlier, the beeps mean something. They can confer you information on problems that the BIOS bump into. Acquaintance your BIOS manufacturer to find out what each one beep series means. Armed with this information you may well be able to figure out why your PC has stopped working and avoid scratching your head and noticing this mammoth question mark on the brink over your PC.

Article Source: http://depositarticles.com/

Browse through 100s of computer related tips Right Here at eztips.biz/computer Search Right Here whatever you need.

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Computers Articles Via RSS!

counter easy hit

Powered by Article Dashboard