Computer beeps give up a message to you

Read More About Computers

One beep from your computer at startup can cause your whole day. Just ask anyone that has turned on the PC and suffered the agony of some beeps and therefore nobody.

When you obtain a computer, it will make your mark plus the BIOS (Basic Input/Output System), pre-installed on an EPROM (Erasable Programmable read Only Memory), chip on the main/motherboard. When you initiate your computer the CPU (Central Processing Unit), sends inspection of the PC to the EPROM BIOS. The BIOS is function of the POST (Power-On Self Test) of the computer. Once the BIOS receive the go ahead since the processor it starts its journey complete all the components and peripheral plans attached to the computer.

CMOS (complementary metal-oxide semiconductor), attach the data that is accessed by the BIOS arrangement. Basically, the CMOS is the explanation that you know how to unplug your computer and maintain the startup and BIOS information. CMOS is maintained on the motherboard in an always-on state supported by a battery installed on the highest board.

All computers come pre-loaded with the BIOS on the motherboard. Motherboard manufacturers work long hours with BIOS manufacturers to make sure the information in the BIOS is certain to the desires and components of the motherboard. Although there are a number of BIOS manufacturers, the two most popular are AMI (American Megatrends Incorp.) and VIA. BIOS simply put, is a program and not a concrete device.

The BIOS also lets you appreciate when there is a delinquent. It accomplishes this by checking for known devices and makes sure they are still attached. When the BIOS identify a problem it sends a series of beeps to the motherboard speaker. This series informs the user of what the problem is, at least as well as the BIOS can decide. Let's say your video card has gone the way of the XT model computer, the BIOS senses that it has died or is not installed. The BIOS sends a series of beeps to the onboard PC speaker to let somebody know you of the problem. The problem is that no manufacturer of BIOS uses the consistent beep series. This is why it is important for you to live through the BIOS software manufacturer for your particular PC.

How do I tell if the BIOS are working?

That is simple, if your computer starts and you get a single short beep, the BIOS is working and has found and relayed the information approximately the input/output devices to the CPU. If you turn on your computer and nothing happens at all, the riddle is probably in your power supply (this assumes that you have it plugged in properly). The BIOS is perhaps still working but the computer cant start because of a power problem. If all is well, the BIOS will find all the attached input/output devices, fire a single short beep to the interior speaker and the computer will set off the boot progression.

There are three ways to change and/or bring up to date the BIOS. Unlike ROM (read-only memory) the EPROM BIOS can be changed or updated. The idiom for changing the EPROM software is referred to as flashing. You may possibly have over heard someone say with the aim of they need to flash the BIOS with a new update. Computer components transform on a day by day basis and the BIOS needs to be open enough to be able to change with them. All computers allow the user to change the BIOS software and how the computer reacts to input/output devices. The standard is to offer the user a way in to the software using a hotkey at startup. More often than not this hotkey is the F2 key, the Del (Delete) key and in some cases the F1 key or a combination of keys. Launch your computer and observe the bottom left corner on the screen. This should consent to you know which key to press to enter the BIOS setup. The BIOS setup, sometimes called the CMOS setup, allows the user to create changes on the fly and save them.

Let's say you added an external modem to your PC on Communication serial port number 1(Comm1), and no matter how many times you install the drivers, you cannot get the PC or Windows to attach importance to it. Probability is that the BIOS do not know that the modem exists. Entering the BIOS setup and changing it to let the use of Comm1 will tight spot the problem and let the PC know that a device exists on that port. This is the most customary use of the BIOS setup and also the easiest to act. WARNING: it is just as trouble-free to totally screw up your system in making changes in the BIOS setup. So be careful and make sure you be aware of how and what to vary.

Changing the incorrect settings can render your computer useless. Second is the Flash BIOS update from the manufacturer of the BIOS. This is a software program that the manufacturer of the BIOS sends out periodically to cover the BIOS conform to new tools and standards. You can acquire this software upgrade from the manufacturer and sometimes from the motherboard manufacturer. Be careful, be very careful installing the software and be confident that it is for your exclusive BIOS. Always see the manufacturer’s directives exactly. The third way is replacing the BIOS chip. Replacing the chip possibly will be your only recourse and should be left to expert computer repairmen.

How do I understand which BIOS I have?

That also easy, the computer will actually tell you. If you are fast enough, you will consider it the BIOS name and version on the screen the jiffy you turn it on. If you are not a speed-reader you can gain access to the BIOS setup and retrieve the information from the setup program. You may e-mail the motherboard manufacturer and regain which BIOS was installed on that board.

Article Source: http://depositarticles.com/

Browse through 100s of computer related tips Right Here at eztips.biz/computer Search Right Here whatever you need.

Please Rate this Article

Not yet Rated

Click the XML Icon Above to Receive Computers Articles Via RSS!

Additional Articles From - Home | Computers

Our other websites
All about SEO
Beauty Tips Forum

	Print This Article
	Post Comment
	Add To Favorites
	Email to Friends
	Ezine Ready

Submit Articles
Member Login
Link Us
Submission Guidelines
Ezine Notifications
Article RSS Feeds
Sitemap

New Stuff
About Us
Developer
Good shopping portal
Link to Us
Contact Us
Privacy Policy
Terms of Service