Home | Computers | Hardware | Windows-based

Computer Repair Tips on Windows Protection Error

By: James Madisons

Read More About Windows-Based

Windows Protection Error occurs mostly when you reboot or shut down your computer. You may be prompted to restart your computer when this error occurs. There may be various reasons behind the error. Defective or faulty software, hardware incompatibility, driver conflict or sometimes problems in BIOS can cause such errors. There are resources provided by Windows to resolve the error. Using some computer repair tips you can resolve the issue.

For resolving the error, you may nee to follow some computer repair tips. First you will need to go to the desktop. Then you need to go to the button ‘start’ and click on the option ‘run’. On the search box that will appear you will need to type ‘msconfig’. Once you have put that on the dialog box you need to click ‘ok’ to move on.

Now computer repair experts suggest you to go to the dialog box System Configuration Utility. Now you need top look for the tab ‘general’ and click on it. Now you need to go to the section ‘selective startup’ and select and unselect each option that will come. You will need to reboot your computer each time you select an option. This will help you to narrow the process down to uninstall the startup software that can be done from the control panel.

You will need to press the key F8 repeatedly while the computer is booting itself up. At the same time you will need to scroll down and select the ‘safe mode’. On the menu ‘windows advanced options’ you will need to press the key ‘enter’.

Now you will need to enter Windows from your own personal account. At first you will need to go to the desktop. At the lower left side of the desktop you need to look for the button ‘start’. From ‘start’ you will need to go to the ‘control panel’ and need to click on it. Look for the option ‘add or remove program’ there. Scroll down to find out the program which is installed just before the ‘Windows protection Error’ started to appear,. Most probably this is the program which is responsible for the error. Select the program and click on the button ‘change/remove’. This step will remove the program from the system and the error with it hopefully.

Sometimes removing some corrupted can also be needed to remove the error. On your desktop you may need to click on the button ‘start’. You will have to right click on the option ‘my computer’ and select the option ‘properties’. Now you need to select the tab ‘hardware’ and then you need to look for the option ‘system properties dialog box’. Click on it and then click on the option ‘device manager’.

Scroll down and look for the program under which the Windows protection Error is showing. Tech support experts suggest that the hardware under which the error is showing is the culprit for the error. So removing the hardware may solve the prpblem. Remove the hardware by uninstalling it from the system. This will remove the hardware and the error.

Article Source: http://depositarticles.com/

James Madison, a computer enthusiast and a contributing writer, writes for subjects like computer help, computer support, computer repair and tech support. He is a technical expert whose expert knowledge on these subjects is nicely reflected in his articles.

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Windows-Based Articles Via RSS!
Additional Articles From - Home | Computers | Hardware | Windows-based
Sign Up for a free account.
Our other websites
All about SEO
Beauty Tips Forum
Submit Articles
Member Login
Link Us
Submission Guidelines
Ezine Notifications
Article RSS Feeds
Sitemap
New Stuff
About Us
Developer
Good shopping portal
Link to Us
Contact Us
Privacy Policy
Terms of Service

counter easy hit

Powered by Article Dashboard