Home | Business | Business Ideas & Tips

Cardboard Balers Wales

By: Strong Recycling Balers


Read More About Business Ideas & Tips

If you are a business manager and you are thinking about a baler for your Cardboard waste you truly should deliberate the subsequent points.

First of all you should really look at the size of baler most apt for your requirements. Most companies will be looking at a small baler in order to maintain costs to a bare minimum. There are lots of baler companies to choose from and the largest part of them have a very significant drawback. Most small balers are too small.

Commonly, on most vertical balers, the pressing plate goes down to just below the top of the bottom door, in its pressing cycle. Also, when the plate comes back up, the Cardboard has a memory and it also wants to rise up with the plate. If you use a small baler, this will mean you can’t put so much Cardboard into your baler each time you fill it.

The W40 Baler from Strong Recycling Balers Ltd, has some very particular features. The piston ram in this baler is much longer. The pressing plate goes a lot deeper down inside the baler. You get a superior compaction, the compaction starts earlier and when the pressing plate rises, the baled Cardboard does not rise so far. This means you can pack much more Cardboard into the W40 Baler than any other small baler. Most small balers will make Cardboard bales up to 30kg. The W40 will make Cardboard bales of more than 50kg.

Another additional feature on the W40 is the opening width of the baler. On the majority of small balers, the internal width is about 535mm to 600mm. If your box is wider than the opening then you will have lots of additional work getting your cardboard inside the baler. The W40 internal loading width is 730mm. This means you can really get much bigger boxes and pieces of cardboard inside your baler without having to fold it or break it down. It really is a labour saving design. The W40 is also the lowest priced baler on the market.

While you will use the baler on “auto”, for nearly all of the time, there is an additional characteristic, where you can change the operation to manual and send the pressing plate down. It will then stay down until you turn the operating switch to the “up” position. When the baler is getting full of Cardboard waste, you can manually operate the baler and leave the plate pressing down. It helps to break down the memory of the Cardboard.

The baler is very quiet and runs off a standard 13amp 220 volt power supply. It only draws a low electrical current when working and will not function with the door open, making it totally safe. There is a very intelligent relay system and the features ensure that there is no needless stress on the motor or other parts. The advanced system design ensures the baler will last for many years.

The suppliers of the W40, is Strong Recycling Balers Ltd. They can arrange free collections of Cardboard bales virtually anywhere in England and Wales. They will make plans for for you to have easy collections and Waste Transfer Notes. The values of Cardboard bale waste can alter and you should constantly be conscious of this.

If you really create large volumes of Cardboard then perhaps the W500 is going to be more suitable for you. The W500 Mill Size Baler will make larger than 500kg Cardboard bales. Mill Size Balers can be very expensive. One of the most competitively priced mill size balers in the UK, is the W500 from Strong Recycling Balers Ltd. It is presently priced around £7,900. You can lease this Mill Size Baler from about £39 per week. This is an incredible price and you will own your baler after 5 years.

You can find “Strong Recycling Balers” on any major search engine. They are based in the West Midlands and the balers are manufactured locally.

Strong Recycling Balers gives Free Delivery, Free 7 Day Trial, Free Training, Free 12 Month Warranty and a good supply of Free Baler Twine. For the Mill Size Baler you will use wire ties and a good supply will be provided to get you started.

To sum up: Before you get yourself a baler which doesn’t suit your needs 100%, have a word with the Managing Director of Strong Recycling Balers, on Free phone 0800 5677 384. The W Range of balers is really perfect for Cardboard, Plastic, Polypropylene, Shredded Paper and many other materials.

Article Source: http://depositarticles.com/

John Webster has many years experience in the waste recycling industry. He is very pro-recycling and helps promote the best recycling solutions for small to medium and large size businesses. You can contact him on Free Phone 0800 5677 384 or through his websites <<www.strongrecyclingbalers.co.uk>>, <<www.strongrecyclingbalers.co.uk>> and <<www.strongrecyclingbalers.com>>

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Business Ideas & Tips Articles Via RSS!

counter easy hit

Powered by Article Dashboard