Cardboard Balers Nottingham

Read More About Business

If you are a company manager and you are thinking about a baler for your Cardboard waste you genuinely should deliberate the subsequent points.

First of all you should really look at the size of baler most apt for your needs. Most businesses will be looking at a small baler in order to maintain expenses to a bare minimum. There are several baler companies to choose from and a large amount of them have a very critical drawback. Most small balers are too small.

Generally, on most vertical balers, the pressing plate goes down to just below the top of the bottom door, in its pressing cycle. Also, when the plate comes back up, the Cardboard has a memory and it also wants to rise up with the plate. If you use a small baler, this will mean you can’t put so much Cardboard into your baler each time you load it.

The V40 Baler from Strong Recycling Balers Ltd, has some very particular features. The piston ram in this baler is much longer. The pressing plate goes much deeper down inside the baler. You get a better compaction, the compaction starts earlier and when the pressing plate rises, the baled Cardboard does not rise so far. This means you can insert much more Cardboard into the V40 Baler than any other small baler. Most small balers will make Cardboard bales up to 30kg. The V40 will make Cardboard bales of more than 50kg.

Another added feature on the V40 is the aperture width of the baler. On the majority of small balers, the internal width is about 535mm to 600mm. If your box is wider than the opening then you will have lots of additional work getting your cardboard inside the baler. The V40 internal loading width is 730mm. This means you can really get much bigger boxes and pieces of cardboard inside your baler without having to fold it or break it down. It really is a labour saving design. The V40 is also the lowest priced baler on the market.

Even though you will use the baler on “auto”, for most of the time, there is an extra feature, where you can switch the operation to manual and send the pressing plate down. It will then stay down until you turn the operating switch to the “up” position. When the baler is getting full of Cardboard waste, you can manually operate the baler and leave the plate pressing down. It helps to break down the memory of the Cardboard.

The baler is very quiet and runs off a standard 13amp 220 volt power supply. It only draws a low electrical current when working and will not function with the door open, making it totally safe. There is a very intelligent relay system and the features guarantee that there is no excessive stress on the motor or other parts. The superior system design ensures the baler will last for many years.

The suppliers of the V40, is Strong Recycling Balers Ltd. They can arrange free collections of Cardboard bales virtually anywhere in England and Wales. They will set up for you to have simple collections and Waste Transfer Notes. The values of Cardboard bale waste can change and you should constantly be aware of this.

If you really generate large volumes of Cardboard then perhaps the V500 is going to be more appropriate for you. The V500 Mill Size Baler will make larger than 500kg Cardboard bales. Mill Size Balers can be very expensive. One of the most competitively priced mill size balers in the UK, is the V500 from Strong Recycling Balers Ltd. It is at this time priced around £7,900. You can lease this Mill Size Baler from about £39 per week. This is an incredible price and you will own your baler after 5 years.

You can find “Strong Recycling Balers” on any major search engine. They are based in the West Midlands and the balers are manufactured locally.

Strong Recycling Balers gives Free Delivery, Free 7 Day Trial, Free Training, Free 12 Month Warranty and a good supply of Free Baler Twine. For the Mill Size Baler you will use wire ties and a good supply will be provided to get you started.

To summarize: Before you get yourself a baler which doesn’t suit your needs 100%, have a word with the Managing Director of Strong Recycling Balers, on Free phone 0800 5677 384. The V Range of balers is essentially perfect for Cardboard, Plastic, Polypropylene, Shredded Paper and several other materials.

Article Source: http://depositarticles.com/

John Webster has many years experience in the waste recycling industry. He is very pro-recycling and helps promote the finest recycling solutions for small to medium and large size businesses. You can contact him on Free Phone 0800 5677 384 or through his websites < <www.strongrecyclingbalers.co.uk> >, <<www.strongrecyclingbalers.co.uk>> and < <www.strongrecyclingbalers.com> >

Please Rate this Article

Not yet Rated

Click the XML Icon Above to Receive Business Articles Via RSS!

Additional Articles From - Home | Business

Our other websites
All about SEO
Beauty Tips Forum

	Print This Article
	Post Comment
	Add To Favorites
	Email to Friends
	Ezine Ready

Submit Articles
Member Login
Link Us
Submission Guidelines
Ezine Notifications
Article RSS Feeds
Sitemap

New Stuff
About Us
Developer
Good shopping portal
Link to Us
Contact Us
Privacy Policy
Terms of Service