Baler To Produce 500kg Bales

Read More About Business

If you are a company proprietor and you are thinking about a baler for your Cardboard waste you really should take into account the subsequent points.

First of all you should really look at the size of baler most suitable for your requirements. Most organizations will be looking at a small baler in order to maintain outlay to a bare minimum. There are many baler companies to choose from and nearly everyone of them have a very serious disadvantage. Most small balers are too small.

Commonly, on the majority of vertical balers, the pressing plate goes down to just below the top of the bottom door, in its pressing cycle. Also, when the plate comes back up, the Cardboard has a memory and it also wants to rise up with the plate. If you use a small baler, this will mean you can’t put so much Cardboard into your baler each time you load it.

The W40 Baler from Strong Recycling Balers Ltd, has some very distinctive features. The piston ram in this baler is much longer. The pressing plate goes a lot deeper down inside the baler. You get a better compaction, the compaction starts earlier and when the pressing plate rises, the baled Cardboard does not rise so far. This means you can fill much more Cardboard into the W40 Baler than any other small baler. Most small balers will make Cardboard bales up to 30kg. The W40 will make Cardboard bales of more than 50kg.

A further added feature on the W40 is the aperture width of the baler. On the majority of small balers, the internal width is about 535mm to 600mm. If your box is wider than the opening then you will have lots of extra work getting your cardboard inside the baler. The W40 internal loading width is 730mm. This means you can really get much larger boxes and pieces of cardboard inside your baler without having to fold it or break it down. It really is a labour saving design. The W40 is also the lowest priced baler on the market.

Although you will use the baler on “auto”, for the majority of the time, there is an additional characteristic, where you can switch the operation to manual and send the pressing plate down. It will then stay down until you turn the operating switch to the “up” position. When the baler is getting full of Cardboard waste, you can manually operate the baler and leave the plate pressing down. It helps to break down the memory of the Cardboard.

The baler is very quiet and runs off a standard 13amp 220 volt power supply. It only draws a low electrical current when working and will not function with the door open, making it totally safe. There is a very intelligent relay system and the features make sure that there is no preventable stress on the motor or other parts. The advanced system design ensures the baler will last for many years.

The suppliers of the W40, is Strong Recycling Balers Ltd. They can arrange free collections of Cardboard bales virtually anywhere in England and Wales. They will set up for you to have trouble-free collections and Waste Transfer Notes. The values of Cardboard bale waste can change and you should constantly be conscious of this.

If you really create large quantities of Cardboard then perhaps the W500 is going to be more appropriate for you. The W500 Mill Size Baler will make larger than 500kg Cardboard bales. Mill Size Balers can be very expensive. One of the most competitively priced mill size balers in the UK, is the W500 from Strong Recycling Balers Ltd. It is presently priced around £7,900. You can lease this Mill Size Baler from about £39 per week. This is an incredible price and you will own your baler after 5 years.

You can find “Strong Recycling Balers” on any major search engine. They are based in the West Midlands and the balers are manufactured locally.

Strong Recycling Balers gives Free Delivery, Free 7 Day Trial, Free Training, Free 12 Month Warranty and a good supply of Free Baler Twine. For the Mill Size Baler you will use wire ties and a good supply will be provided to get you started.

To recap: Before you get yourself a baler which doesn’t suit your needs 100%, have a word with the Managing Director of Strong Recycling Balers, on Free phone 0800 5677 384. The W Range of balers is essentially perfect for Cardboard, Plastic, Polypropylene, Shredded Paper and many other materials.

Article Source: http://depositarticles.com/

John Webster has many years experience in the waste recycling industry. He is very pro-recycling and helps promote the finest recycling solutions for small to medium and large size businesses. You can contact him on Free Phone 0800 5677 384 or through his websites <<www.strongrecyclingbalers.co.uk>>, <<www.strongrecyclingbalers.co.uk>> and <<www.strongrecyclingbalers.com>>

Please Rate this Article

Not yet Rated

Click the XML Icon Above to Receive Business Articles Via RSS!

Additional Articles From - Home | Business

Our other websites
All about SEO
Beauty Tips Forum

	Print This Article
	Post Comment
	Add To Favorites
	Email to Friends
	Ezine Ready

Submit Articles
Member Login
Link Us
Submission Guidelines
Ezine Notifications
Article RSS Feeds
Sitemap

New Stuff
About Us
Developer
Good shopping portal
Link to Us
Contact Us
Privacy Policy
Terms of Service