Home | Computers | Networks

At&t 2wire Dsl Router - Setup Static Ip Addresses

By: Nils Hyatt

Read More About Networks

Have you simply bought a business dsl plan from At&t, which incorporates 5 static ip addresses and wish to learn to set them as much as keep away from paying a $200 charge. The very first thing that you will wish to do is use out what your default gateway ip address is in your 2wire dsl router. The easiest way to find your default gateway ip is to go to the cmd immediate and sort in "ipconfig". You can find the command prompt by going to the beginning button -> All Packages -> Equipment -> Command prompt. After the command immediate window opens, this is the place you'll kind in ipconfig. (See Example Below) Once you type in "ipconfig" you must see some outcomes, that is where you will see that what your default gateway. For instance my default gateway is 192.168.10.

The next factor it's a must to do is sort you default gateway address into a web browser, reminiscent of Internet Explorer or Mozilla Firefox. After you kind your default gateway ip tackle into your web browser, you must get a display that appears just like the one below.

Once you have opened the configuration screen on your 2wire dsl modem, you will want to click on the broadband link tab The broadband link tab is located near the highest of the screen.

Once you have accessed the broadband hyperlink tab, you'll then click on Advanced setting positioned inside the broadband hyperlink tab. Within the advanced setting window, you will change your username slightly. What you are going to need to doing is change USERNAME@sbcglobal.web to USERNAME@static.sbcglobal.net. Then click on the save button. (Check with the picture under)

After a couple of minutes your router should be completed configuring itself from its regular dynamic ip to a static ip. What you'll want to do now is configure your router, so you possibly can assign totally different static ip addresses to your totally different community devices. The first thing you'll do is click on the House Network tab, positioned at the prime of the screen.

You will then click on the Advanced Setting tab positioned throughout the Residence Network tab. As soon as you are on the superior setting web page, locate the Bridge Community setting and click enable. For the subnet masks I used 255.255.255.248. After you click on save, you might be then going to want to click on on Edit Address Allocation tab. Inside the edit address allocation settings page you are able to assign different static ip deal with to your completely different servers, laptop and different networked devices.

When you click save on the edit address allocation tab, you're going to now must configure every device to receive a static ip address. On a home windows based mostly pc, simply go into the command prompt window and type in "ipconfig /launch" then kind in "ipconfig /renew". In case you are utilizing Vista, you are going to have to run command immediate as administrator. Are you on the lookout for more information on setting up your 2wire dsl modem.

Article Source: http://depositarticles.com/

At&t 2wire Dsl Router – Configure Static Ip Addresses Static Ip Address For Vista Network

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Networks Articles Via RSS!
Additional Articles From - Home | Computers | Networks
Sign Up for a free account.
Our other websites
All about SEO
Beauty Tips Forum
Submit Articles
Member Login
Link Us
Submission Guidelines
Ezine Notifications
Article RSS Feeds
Sitemap
New Stuff
About Us
Developer
Good shopping portal
Link to Us
Contact Us
Privacy Policy
Terms of Service

counter easy hit

Powered by Article Dashboard