A Toronto Roofing Repair Story

Read More About Home Improvement

In Toronto, roofing repair is an ongoing process because of the wide range of weather extremes that the city experiences. From the searing heat and humidity of Toronto’s summers to the below freezing temperatures of winters in Toronto, roofing repairs are necessary for commercial property owners wanting to extend the life of their roofs.

But, before a roof is repaired, you need to know what’s wrong with it. Maintaining a commercial roof means being able to spot the signs that repairs are needed. If you learn to spot the signs of problems with your commercial flat roof, you can repair them before they become costly issues.

The first and perhaps most obvious sign that your flat roof has a problem is pooling water. Flat roofs are not completely flat. They are built with a slight incline so water drains off and does not stress the roof. Sometimes, after a rain or spring thaw, pools of water will appear on your flat roof. This is not automatically a sign of a serious problem. If the water remains 72 hours after the rain or thaw, then it requires attention. Any pooling water on a commercial flat roof is cause for attention, but standing water is the sign of a problem that should be repaired.

Blisters are another easy to spot flat roofing problem. As a roof ages, moisture can seep below the roof’s surface and collect between roofing layers. When it is heated, the moisture expands and it contracts as it cools. Expansion also occurs if the moisture freezes. With repeated cycles of expansion and contraction (remember Toronto’s winters) upper roofing layers detach from the layers below. The result is a bump, or blister, on the surface of your flat roof.

If there is a lot of foot traffic on your roof, from humans or animals, you risk exposing your roof’s felt layer. The felt layer is usually covered with layers of tar and/or rubber and gravel. Foot traffic, wind blown debris, or just regular wear and tear will expose the felt layers. Once the felt is exposed, it is much easier for moisture to get in underneath your roof’s top layers and start causing damage.

Another problem that is caused by the repeated freeze/thaw cycles that are so common in Toronto is pressure ridging. Many flat roofs are constructed from a number of rubber roofing panels that are placed side by side and the joints sealed. Expansion and contraction causes the joints to separate, which can crack the surface layer and allow moisture to get in.

Other roofing issues include problems with sealing and caulking, metalwork and poor installation or repairs. Regardless of what problems might arise with your roof, it is important to spot and repair them as soon as possible so you get the longest lifespan from your roof.

Article Source: http://depositarticles.com/

Let Cansky Roofing Inc. be your trusted source for reliable Toronto Roofing Repair Contact Cansky today and get more life from your roof.

Please Rate this Article

Not yet Rated

Click the XML Icon Above to Receive Home Improvement Articles Via RSS!

Additional Articles From - Home | Home | Home Improvement

Our other websites
All about SEO
Beauty Tips Forum

	Print This Article
	Post Comment
	Add To Favorites
	Email to Friends
	Ezine Ready

Submit Articles
Member Login
Link Us
Submission Guidelines
Ezine Notifications
Article RSS Feeds
Sitemap

New Stuff
About Us
Developer
Good shopping portal
Link to Us
Contact Us
Privacy Policy
Terms of Service