Learn to Grind Before Tearing up the Material

Read More About Construction

One might think this subject really doesn't need explaining but you would be astonished if you had seen people over time, ruin the work piece as I have seem them do.
First let's establish what we are grinding for the purpose of this article. I want to focus on anything metal. Plate, pipe, iron, stainless, metal of any kind. I had the advantage of working with some of the most skilled craftsmen over the last quarter century. I was fortunate enough to pick up on their skills that helped me in my own career as a welder.
One of the things I learned early on was to use the appropriate tool for the job at hand. There is no need to use a nine inch grinder for a one inch pipe. Of course, that is an extreme example but proves the point.
When using a grinder there is not only proper tool consideration but also safety elements to consider. Let us consider first the proper tool for the job.
There are air grinders as well as electric grinders. Most situations will call for right angle electric grinders that work off of alternating current (ac). This is the common household or construction type product that is purchased from most hardware stores all over America. I can not speak for countries outside of America. For normal service a 4 1/2" electric model will be sufficient. The next size up is a 5" that is designed for more industrial type service. After this is the 6", seven inch and the nine inch. A good all purpose grinder that can handle both light and heavy applications is the 5" Makita model. I personally owned two Makita 5" and modified the safety guard so it would receive a 7" wheel.
The reason for this modification was for better coverage when grinding and longer lasting wheel life.
Now Makita makes a 6" and a 7" grinder but at the time I bought mine they did not offer those sizes. When working with metal the size of the work piece has impact on deciding what tool to use.
When grinding for speed to move through hardened materials or materials that are relatively thick, it is best to choose a wheel that can hold up to severe load requirement. Usually a grinding wheel with a thickness of quarter inch is suitable.
When grinding on materials that are non hardened and not over 3/8" thick, I would prefer a 1/8" thick wheel. The lighter thickness wheel is easier to control as well. This wheel is perfect for surfacing a bevel on a pipe material, whether hardened or not. When I say hardened I am referring to metal such as nickel alloy materials.
Technique in grinding is extremely important when approaching the actual application of the grinder as it comes in contact with the material. When using the right angle grinder the wheel must not dig into the work piece when making contact unless a groove cut is desired. The ideal contact point on the grinding wheel is about an eight of an inch back from the edge of the wheel. This can not be accomplished when digging the edge of the wheel into the work element. The wheel therefore must be laid more flat to the surface of the work piece. Laying the wheel surface to the work in this way will allow for more control and transition in the actual grinding.
When grinding on a round surface such as pipe, it is better to go even further in on the grinding wheel toward the center of the wheel. This will ensure better control over a bevel approach.
When working with pipe, this beveling approach will give a more factory type surface when grinding as if a machine put on the pipe bevel edge. Moving the wrists from side to side or front to back keeping the proper angel of the grinding wheel will give a better overall finished surface.
Please bear in mind that safety glasses, grinding shields, ear plugs, and guards are all put in place with the purpose of protecting the eyes, ears, and face from dangerous metal shavings that can run the individual for a lifetime of hurt in a moment of time.

Article Source: http://depositarticles.com/

If you are interested in seeing this technique demonstrated, please visit my website www.thewelderslens.com where you will find DVD materials that incorporate grinding and welding together. Proper grinding can make fit up and welding much easier. My pipe package gives proper technique as described in this article. Thanks, Michael D. Treadway. Get a Unique Version of this Article Article Marketing

Please Rate this Article

Not yet Rated

Click the XML Icon Above to Receive Construction Articles Via RSS!

Additional Articles From - Home | Business | Construction

Our other websites
All about SEO
Beauty Tips Forum

	Print This Article
	Post Comment
	Add To Favorites
	Email to Friends
	Ezine Ready

Submit Articles
Member Login
Link Us
Submission Guidelines
Ezine Notifications
Article RSS Feeds
Sitemap

New Stuff
About Us
Developer
Good shopping portal
Link to Us
Contact Us
Privacy Policy
Terms of Service