Home | Computers | Printers

Free Decoupage Prints? Utilize your Inkjet printer

By: Nick Swanson

Read More About Printers

Are you looking for Free Decoupage Prints?
Here's a great way to get started!

1. When using images generated from ink jet printers, you should pause for the ink to dry totally and then you must at the outset test that the dye does not bleed when you apply paste on it because adhesive has dampness that may spoil the ink of this printer.

2. In case your color bleeds with prints from ink jet printer, just try using a gentle dampness adhesive. And if the trouble still persists you will have to use the laser copies of your image. Use a felt tip or marker to sharpen the outlines of your decoupage picture.

3. Slant your scissors or craft knife when cutting the image. This would make certain that the flipside side of the picture is not visible on your completed object. Delicately cut your image so that you do not miss out on any background or adjacent picture.

4. On a large amount of your decoupage projects, you would be pasting your images on the top but with clear glass object you would paste it on the non-used surface. Consider for example doing a clear glass plate. To do such an object keep your object (like plate in this case) underside up and do your pasting work with image front not facing you but such a way that its shows up when the plate is kept right. This will guarantee that the gloss layer does not mess up the glass finish.

5. Allow your object to dry totally. And then layer it using gloss. Before proceeding to apply another coat, pause for the first one to get dry. Once it's entirely dry, apply another coat. Mod Podge is the most common decoupage polish. It available in a clear as well as antique yellow formula. Mod-Podge is obtainable from many craft outlets including Christopher Freville Home Crafts and Michael Sharman Hobby Stores Inc.

6. Before pasting you have got to firstly put down your cut outs and then once finalized paste them. Clear-drying polyvinyl acetate glue can be used for the same. For decoupage you can employ Elmer's Glue-All and Mod podge.

7. When applying adhesive to glass you must dilute the paste in ratio, 3:1 i.e. 3 part of glue and one part of water. It's because glass is a non porous material and it won't absorb anything rather the bulky glue would make little chips.

8. To utilize white paste, you have got to first wet your brush with water and then put it in the adhesive for use. Make sure that you have the right amount of glue (of appropriate consistency) already ready to finish off every piece.

9. Clean off the surface with your fingertips to smoothen it. You can also bring into play a rubber brayer for the same. Keep a moist cloth handy and clean any spilled or extra glue. You can also employ a damp sponge or paper towel to do this. Press the edges nicely so that they do curl up and are properly stuck.

10. A paste sealant like Mod Podge or Elmer's Glue-all should be applied on the projects which are delicate, before working on them. And then leave it to get dry.

Article Source: http://depositarticles.com/

Get more Free Decoupage Prints, You'll get alot more than Free Decoupage Prints, You'll learn everything about decoupage.

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Printers Articles Via RSS!
Additional Articles From - Home | Computers | Printers
Sign Up for a free account.
Our other websites
All about SEO
Beauty Tips Forum
Submit Articles
Member Login
Link Us
Submission Guidelines
Ezine Notifications
Article RSS Feeds
Sitemap
New Stuff
About Us
Developer
Good shopping portal
Link to Us
Contact Us
Privacy Policy
Terms of Service

counter easy hit

Powered by Article Dashboard